|
Other Items from Bichromate Emulsions
#5 Blue - HOLDEN'S #5 BLUE (for use with plastisols) Holden's #5 Blue is specifically designed for the home screen maker who has a set-up to cure plastisols at 300oF, as plastisols do not set unless they reach 300oF.
#50 - HOLDEN’S #50 (water and solvent resistant) Holden’s #50 Emulsion uses an A B sensitizer. The recommended dosage for A B sensitizer to Emulsion is one part sensitizer to four parts of emulsion. This permits the home screen maker the opportunity to measure what he or she needs for that particular job. After sensitizing the emulsion that is, after adding the A B sensitizer -- it only lasts about six to eight hours. You mix only what you need for one-time use. These emulsions also permit you to expose your screens with less sensitive light sources such as 200 watt bulbs or daylight fluorescents. There is also no need to worry about whether or not you wish to print water phase textiles, aqueous all surface inks, or oil-based plastisol inks. Our envirosafe wash-ups may be used in the case of plastisols, or with water for your aqueous medium.
|
